[. . . ] N Make sure to distinguish between the front and back of the stand when assembling them. [. . . ] N To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV. Fasten two screws at position 1 and then fasten two screw at position 2. If you fasten the screws with the LCD TV placed down, it may lean to one side.
Using the remote control buttons
MENU Button Display the main on-screen menu. Confirm the setting.
RETURN Button Return to the previous menu.
EXIT Exit the on-screen menu.
I-II
English - 2
Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently. Digital Channels : 5 Frequency 113 MHz Analogue Channels : 6 15%
Stop U Move E Enter m Skip U Move E Enter m Skip E Enter m Skip
Step 7
Plug & Play
Set the Clock Mode.
Step 8
Plug & Play
How to get the best perfotmance from your new HDTV Step 1. Connect the HD Source Unit to the TV using the Component video (Red, Green, Blue) and audio (Red, White) cables or HDMI Cable.
HD box
Step 9
Plug & Play
Enjoy your TV.
Clock Mode
Auto : Auto Manual
HD Cable
TV rear view
Component Cable
OK
U Move E Enter m Skip
Step 2. Press the Source button on the Remote Control to select HDMI or Component Input. Depending on your location, HD programs may also be viewd using an RF antenna. [. . . ] Depending on your location, HD programs may also be viewd using an RF antenna. [. . . ]